Journal Papers

Last updated 13/8/09.

Copyright of the papers below rests with a variety of different parties. They are made available solely on the same basis that I would supply a single copy of a paper to an individual. It is up to you to ensure that your use of a paper does not infringe copyright law.

               
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
00
01
02
03
04
05
06
07
08
    
In Press
Submitted
  1. Houlsby, G.T. (1979)
    "The Work Input to a Granular Material",
    Géotechnique, Vol. 29, No. 3, September, pp 354-358, ISSN 0016-8505
    Paper as pdf (1072k), request a copy by email
  2. Houlsby, G.T. and Wroth, C.P. (1980)
    "Strain and Displacement Discontinuities in Soil",
    Proceedings of the ASCE, Journal of the Engineering Mechanics Division, Vol. 106, No. EM4, September, pp 753-771, ISSN 0044-7951
    Paper as pdf (3733k), request a copy by email
  3. Houlsby, G.T. (1982)
    "Theoretical Analysis of the Fall Cone Test",
    Géotechnique, Vol. 32, No. 2, June, pp 111-118, ISSN 0016-8505
    Paper as pdf (2769k), request a copy by email
  4. Nedderman, R.M., Tüzün, U., Savage, S.B. and Houlsby, G.T. (1982)
    "The Flow of Granular Materials - I, Discharge Rates from Hoppers",
    Chemical Engineering Science, Vol. 37, No. 11, pp 1597-1609, ISSN 0009-2509
    Paper as pdf (1887k), doi:10.1016/0009-2509(82)80029-8, request a copy by email
  5. Tüzün, U., Houlsby, G.T., Nedderman, R.M. and Savage, S.B. (1982)
    "The Flow of Granular Materials - II, Velocity Distributions in Slow Flow",
    Chemical Engineering Science, Vol. 37, No. 12, pp 1691-1709, ISSN 0009-2509
    Paper as pdf (2934k), doi:10.1016/0009-2509(82)80042-0, request a copy by email
  6. Savage, S.B., Nedderman, R.M., Tüzün, U. and Houlsby, G.T. (1983)
    "The Flow of Granular Materials - III, Rapid Shear Flows",
    Chemical Engineering Science, Vol. 38, No. 2, pp 189-195, ISSN 0009-2509
    Paper as pdf (3822k), doi:10.1016/0009-2509(83)85001-5, request a copy by email
  7. Graham, J. and Houlsby, G.T. (1983)
    "Elastic Anisotropy of a Natural Clay",
    Géotechnique, Vol. 33, No. 2, June, pp 165-180, ISSN 0016-8505
    1. Corrigendum: Géotechnique, Vol. 33, No. 3, September 1983, p 354
    Paper as pdf (5769k), request a copy by email
  8. Houlsby, G.T. and Wood, D.M. (1983)
    Discussion on `Wood, D.M. (1982) "Cone Penetrometer and the Liquid Limit", Géotechnique, Vol. 32, No. 2, June, pp 152-157',
    Géotechnique, Vol. 33, No. 4, December, p 463, ISSN 0016-8505
    Paper as pdf (335k), request a copy by email
  9. Sloan, S.W. and Houlsby, G.T. (1984)
    "An Implementation of Watson's Algorithm for Computing 2-Dimensional Delaunay Triangulations",
    Advances in Engineering Software, Vol. 6, No. 4, pp 192-197, ISSN 0141-1195
    Paper as pdf (3607k), request a copy by email
  10. Houlsby, G.T. and Sloan, S.W. (1984)
    "Efficient Sorting Algorithms in FORTRAN 77",
    Advances in Engineering Software, Vol. 6, No. 4, pp 198-203, ISSN 0141-1195
    Paper as pdf (3543k), request a copy by email
  11. Randolph, M.F. and Houlsby, G.T (1984)
    "The Limiting Pressure on a Circular Pile Loaded Laterally in Cohesive Soil",
    Géotechnique, Vol. 34, No. 4, December, pp 613-623, ISSN 0016-8505
    1. Reply to discussion by W.H. Ward: Géotechnique, Vol. 36, No. 3, September 1986, p 457
    Paper as pdf (4065k), request a copy by email
  12. Houlsby, G.T. (1985)
    "The Use of a Variable Shear Modulus in Elastic-Plastic Models for Clays",
    Computers and Geotechnics, Vol. 1, No. 1, pp 3-21, ISSN 0266-352X
    Paper as pdf (1902k), doi:10.1016/0266-352X(85)90012-6, request a copy by email
  13. Graham, J. and Houlsby, G.T. (1985)
    Discussion on `Nakase, A. and Kamei, T. (1984) "Influence of Anisotropy of Deformation Modulus on Effective Stress Path", Soils and Foundations, Vol. 24, No. 2, pp 106-110',
    Soils and Foundations, Vol. 25, No. 2, pp 158-160, ISSN 0038-0806
    Paper as pdf (766k), request a copy by email
  14. Burd, H.J. and Houlsby, G.T. (1986)
    "A Large Strain Finite Element Formulation for One Dimensional Membrane Elements",
    Computers and Geotechnics, Vol. 2, No. 1, pp 3-22, ISSN 0266-352X
    Paper as pdf (2892k), doi:10.1016/0266-352X(86)90013-3, request a copy by email
  15. Houlsby, G.T. (1986)
    "A General Failure Criterion for Frictional and Cohesive Materials",
    Soils and Foundations, Vol. 26, No. 2, pp 97-101, ISSN 0038-0806
    Paper as pdf (1320k), request a copy by email
  16. Love, J.P, Burd, H.J., Milligan, G.W.E. and Houlsby, G.T. (1987)
    "Analytical and Model Studies of Reinforcement of a Layer of Granular Fill on a Soft Clay Subgrade",
    Canadian Geotechnical Journal, Vol. 24, No. 4, pp 611-622, ISSN 0008-3674
    Paper as pdf (5547k), request a copy by email
  17. Teh, C.I. and Houlsby, G.T. (1987)
    Discussion on `Baligh, M.M. (1986) "Undrained Deep Penetration, I: Shear Stresses", Géotechnique, Vol. 36, No. 4, December, pp 471-485',
    Géotechnique, Vol. 37, No. 4, December, pp 525-527, ISSN 0016-8505
    Paper as pdf (873k), request a copy by email
  18. Houlsby, G.T. and Hitchman, R. (1988)
    "Calibration Chamber Tests of a Cone Penetrometer in Sand",
    Géotechnique, Vol. 38, No. 1, March, pp 39-44, ISSN 0016-8505
    1. Reply to discussions by M. Fahey and K. Been, D. Horsfield and M.G. Jefferies, Géotechnique, Vol. 39, No. 4, December 1989, pp 729-731
    Paper as pdf (3756k), request a copy by email
  19. Houlsby, G.T. and Withers, N.J. (1988)
    "Analysis of the Cone Pressuremeter Test in Clay",
    Géotechnique, Vol. 38, No. 4, December, pp 575-587, ISSN 0016-8505
    (Awarded the inaugural Geotechnical Research Medal, Institution of Civil Engineers, 1989)
    Paper as pdf (4674k), request a copy by email
  20. Houlsby, G.T., Milligan, G.W.E., Jewell, R.A. and Burd, H.J. (1989)
    "A New Approach to the Design of Unpaved Roads: Part I",
    Ground Engineering, Vol. 22, No. 3, April, pp 25-29, ISSN 0017-4653
    1. Corrigendum: Ground Engineering, Vol. 22, No. 5, July 1989, p 26
    Paper as pdf (3370k), request a copy by email
  21. Milligan, G.W.E., Jewell, R.A., Houlsby, G.T. and Burd, H.J. (1989)
    "A New Approach to the Design of Unpaved Roads: Part II",
    Ground Engineering, Vol. 22, No. 8, pp 37-42, ISSN 0017-4653
    Paper as pdf (1248k), request a copy by email
  22. Houlsby, G.T. (1989)
    Discussion on `M.G. Jefferies (1988) "Determination of Horizontal Geostatic Stress in Clay with Self-Bored Pressuremeter", Canadian Geotechnical Journal, Vol. 25, No. 3, pp 559-573',
    Canadian Geotechnical Journal, Vol. 26, No. 4, pp 758-759, ISSN 0008-3674
    Paper as pdf (795k), request a copy by email
  23. Burd, H.J. and Houlsby, G.T. (1990)
    "Finite Element Analysis of Two Cylindrical Expansion Problems Involving Near Incompressible Material Behaviour",
    International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 14, pp 351-366, ISSN 0363-9061
    Paper as pdf (4444k), doi:10.1002/nag.1610140504, request a copy by email
  24. Yu, H.S. and Houlsby, G.T. (1990)
    "A New Finite Element Formulation for One-Dimensional Analysis of Elastic-Plastic Materials",
    Computers and Geotechnics, Vol. 9, No. 4, pp 241-256, ISSN 0266-352X
    Paper as pdf (3215k), doi:10.1016/0266-352X(90)90040-3, request a copy by email
  25. Teh, C.I. and Houlsby, G.T. (1991)
    "An Analytical Study of the Cone Penetrometer Test in Clay",
    Géotechnique, Vol. 41, No. 1, January, pp 17-34, ISSN 0016-8505
    1. Reply to discussion by M. Fahey and A. Lee Goh: Géotechnique, Vol. 42, No. 3, September 1992, pp 529-532
    Paper as pdf (6885k), request a copy by email
  26. Yu, H.S. and Houlsby, G.T. (1991)
    "Finite Cavity Expansion in Dilatant Soils: Loading Analysis",
    Géotechnique, Vol. 41, No. 2, pp 173-183, ISSN 0016-8505
    1. Reply to discussion by M. Manassero and corrigendum, Géotechnique, Vol. 42, No. 4, December 1992, pp 649-654
    Paper as pdf (5730k), request a copy by email
  27. Schnaid, F. and Houlsby, G.T. (1991)
    "An Assessment of Chamber Size Effects in the Calibration of In Situ Tests in Sand",
    Géotechnique, Vol. 41, No. 3, September, pp 437-445, ISSN 0016-8505
    Paper as pdf (3305k), request a copy by email
  28. Houlsby, G.T. and Wroth, C.P. (1991)
    "The Variation of the Shear Modulus of a Clay with Pressure and Overconsolidation Ratio",
    Soils and Foundations, Vol. 31, No. 3, September, pp 138-143, ISSN 0038-0806
    Paper as pdf (1926k), request a copy by email
  29. Randolph, M.F., Leong, E.C. and Houlsby G.T. (1991)
    "One Dimensional Analysis of Soil Plugs in Pipe Piles",
    Géotechnique, Vol. 41, No. 4, December, pp 587-598, ISSN 0016-8505
    Paper as pdf (4467k), request a copy by email
  30. Houlsby, G.T. (1991)
    Discussion on `S.J. Wheeler (1990) "Movement of Large Gas Bubbles in Unsaturated Fine-Grained Sediments", Marine Geotechnology, Vol. 9, No 2. pp 113-129',
    Marine Geotechnology, Vol. 10, No. 3/4, 371-373, ISSN 0360-8867
    Paper as pdf (660k), request a copy by email
  31. Houlsby, G.T (1992)
    Discussion on `Matsuoka, H., Hoshikawa, T. and Ueno, K. (1990) "A General Failure Criterion and Stress-Strain Relation for Granular Materials to Metals", Soils and Foundations, Vol. 30, No. 2, June, pp 119-127',
    Soils and Foundations, Vol. 32. No. 1, March, pp 230-231, ISSN 0038-0806
    Paper as pdf (582k), request a copy by email
  32. Schnaid, F. and Houlsby, G.T. (1992)
    "Measurement of the Properties of Sand in a Calibration Chamber by the Cone Pressuremeter Test",
    Géotechnique, Vol. 42, No. 4, December, pp 587-601, ISSN 0016-8505
    1. Reply to discussion by M. Manassero, Géotechnique, Vol. 44, No 3, September 1994, pp 529-532
    Paper as pdf (7226k), request a copy by email
  33. Bell, R.W., Houlsby, G.T. and Burd, H.J. (1993)
    "Suitability of Two and Three Dimensional Finite Elements for Modelling Material Incompressibility Using Exact Integration",
    Communications in Numerical Methods in Engineering, Vol. 9, No. 4, April, pp 313-329, ISSN 0748-8025
    Paper as pdf (5048k), doi:10.1002/cnm.1640090405, request a copy by email
  34. Yu, H.S., Houlsby, G.T. and Burd, H.J. (1993)
    "A Novel Isoparametric Finite Element Displacement Formulation for Axisymmetric Analysis of Nearly Incompressible Materials",
    International Journal of Numerical Methods on Engineering, Vol. 36, No. 14, pp 2453-2472, ISSN 0029-5981
    Paper as pdf (5547k), doi:10.1002/nme.1620361409, request a copy by email
  35. Houlsby, G.T. and Carter, J.P. (1993)
    "The Effects of Pressuremeter Geometry on the Results of Tests in Clay",
    Géotechnique, Vol. 43, No. 4, December, pp 567-576, ISSN 0016-8505
    1. Reply to discussion by M.G. Jefferies and D.A. Shuttle, Géotechnique, Vol. 95, No. 4, December 1995, pp 745-748
    Paper as pdf (7203k), request a copy by email
  36. Houlsby, G.T. and Schnaid, F. (1994)
    "Interpretation of Shear Moduli from Cone-Pressuremeter Tests in Sand",
    Géotechnique, Vol. 44, No. 1, March, pp 147-164, ISSN 0016-8505
    Paper as pdf (6389k), request a copy by email
  37. Wheeler, S.J. and Houlsby, G.T. (1994)
    Discussion on `P.R. Smith, R.J. Jardine and D.W. Hight (1992) "The Yielding of Bothkennar Clay", Géotechnique, Vol. 42, No. 2, June, pp 257-274',
    Géotechnique, Vol. 44, No. 2, June, pp 359-361, ISSN 0016-8505
    Paper as pdf (1519k), request a copy by email
  38. Yu, H.S. and Houlsby, G.T. (1995)
    "A Large Strain Analytical Solution for Cavity Contraction in Dilatant Soils",
    International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 19, pp 793-811, ISSN 0363-9061
    Paper as pdf (4325k), doi:10.1002/nag.1610191104, request a copy by email
  39. Houlsby, G.T. (1997)
    "The Work Input to an Unsaturated Granular Material",
    Géotechnique, Vol. 47, No. 1, March, pp 193-196, ISSN 0016-8505
    Paper as pdf (279k), request a copy by email
  40. Collins, I.F. and Houlsby, G.T. (1997)
    "Application of Thermomechanical Principles to the Modelling of Geotechnical Materials",
    Proceedings of the Royal Society of London, Series A, Vol. 453, pp 1975-2001, ISSN 1364-5021
    Paper as pdf (422k), doi:10.1098/rspa.1997.0107, request a copy by email
  41. Houlsby, G.T. (1997)
    Discussion on `D.A. Shuttle and M.G. Jefferies (1995) "A Practical Geometry Correction for Interpreting Pressuremeter Tests in Clay", Géotechnique, Vol. 45, No. 3, June, pp 549-553',
    Géotechnique, Vol. 47, No. 4, September, pp 879-880, ISSN 0016-8505
    Paper as pdf (205k), request a copy by email
  42. Butterfield, R., Houlsby, G.T. and Gottardi, G. (1997)
    "Standardised Sign Conventions and Notation for Generally Loaded Foundations",
    Géotechnique, Vol. 47, No. 4, December, pp 1051-1052, ISSN 0016-8505
    1. Corrigendum: Géotechnique, Vol. 48, No. 1, p 157
    Paper as pdf (487k), request a copy by email
  43. Williams, M.S., Thompson, R.S.G. and Houlsby, G.T. (1998)
    "Non-Linear Dynamic Analysis of Offshore Jack-up Units",
    Computers and Structures, Vol. 69, pp 171-180, ISSN 0045-7949
    Paper as pdf (591k), doi:10.1016/S0045-7949(98)00119-9, request a copy by email
  44. Houlsby, G.T. and Puzrin, A.M. (1999)
    "The Bearing Capacity of a Strip Footing on Clay under Combined Loading",
    Proceedings of the Royal Society of London, Series A, Vol. 455, No. 1983, pp 893-916, ISSN 1364-5021
    Paper as pdf (263k), doi:10.1098/rspa.1999.0340, request a copy by email
  45. Gottardi, G., Houlsby, G.T. and Butterfield, R. (1999)
    "The Plastic Response of Circular Footings on Sand under General Planar Loading",
    Géotechnique, Vol. 49, No. 4, pp 453-470, ISSN 0016-8505
    Paper as pdf (2406k), request a copy by email
  46. Houlsby, G.T. and Sharma, R.S. (1999)
    "A Conceptual Model for the Yielding and Consolidation of Clays",
    Géotechnique, Vol. 49, No. 4, pp 491-502, ISSN 0016-8505
    Paper as pdf (658k), request a copy by email
  47. Williams, M.S., Thompson, R.S.G. and Houlsby, G.T. (1999)
    "A Parametric Study of the Non-Linear Dynamic Behaviour of an Offshore Jack-up Unit",
    Engineering Structures, Vol. 21, pp 383-394, ISSN 0141-0296
    Paper as pdf (4547k), doi:10.1016/S0141-0296(97)00222-8, request a copy by email
  48. Burd, H.J., Houlsby, G.T., Augarde, C.E. and Liu, G. (2000)
    "Prediction of Tunnel-Induced Settlement Damage to Masonry Structures",
    Proceedings of the Institution of Civil Engineers, Geotechnical Engineering, Vol. 143, pp 17-30, ISSN 1353-2618
    (Awarded Telford Prize, Institution of Civil Engineers, 2001)
    Paper as pdf (694k), request a copy by email
  49. Martin, C.M. and Houlsby, G.T. (2000)
    "Combined Loading of Spudcan Foundations on Clay: Laboratory Tests",
    Géotechnique, Vol. 50, No. 4, pp 325-338, ISSN 0016-8505
    Paper as pdf (1644k), request a copy by email
  50. Houlsby, G.T. and Puzrin, A.M. (2000)
    "A thermomechanical framework for constitutive models for rate-independent dissipative materials",
    International Journal of Plasticity, Vol. 16 No. 9, pp 1017-1047, ISSN 0749-6419
    Paper as pdf (454k), doi:10.1016/S0749-6419(99)00073-X, request a copy by email
  51. Houlsby, G.T. Liu, G. and Augarde, C.E. (2000)
    "A tying scheme for imposing displacement constraints in finite element analysis",
    Communications in Applied Numerical Methods, Vol. 16, September, pp 721-732, ISSN 1099-0887
    Paper as pdf (2724k), doi:10.1002/1099-0887(200010)16:10<721::AID-CNM371>3.0.CO;2-A, request a copy by email
  52. Houlsby, G.T. and Byrne, B.W. (2000)
    “Suction caisson foundations for offshore wind turbines and anemometer masts”,
    Wind Engineering, Vol. 24, No. 4, pp 249-255, ISSN 0309-524X
    Paper as pdf (87k), doi:10.1260/0309524001495611, request a copy by email
  53. Liu, G, Houlsby, G.T. and Augarde, C.E. (2001)
    “Two-dimensional analysis of settlement damage to masonry buildings caused by tunnelling”,
    The Structural Engineer, Vol. 79, No. 1, January, pp 19-25, ISSN 1466-5123
    Paper as pdf (5062k), request a copy by email
  54. Houlsby, G.T. and Byrne, B.W. (2001)
    Discussion on: ‘Sieffert, J.-G. and Bay-Gress, Ch. (2000) “Comparison of European bearing capacity calculation methods for shallow foundations”, Proceedings of the Institution of Civil Engineers, Geotechnical Engineering, Vol. 143, pp 65-74’,
    Proceedings of the Institution of Civil Engineers, Geotechnical Engineering, Vol. 149, pp 63-64, ISSN 1353-2618
    Paper as pdf (203k), doi:10.1680/geng.149.1.63.39306, request a copy by email
  55. Puzrin, A.M., Houlsby, G.T. and Burland, J.B. (2001)
    "Thermomechanical formulation of a small strain model for overconsolidated clays",
    Proceedings of the Royal Society of London, Series A, Vol. 457, No. 2006, February, pp 425-440, ISSN 1364-5021
    Paper as pdf (278k), doi:10.1098/rspa.2000.0673, request a copy by email
  56. Puzrin, A.M. and Houlsby, G.T. (2001)
    “Strain-based plasticity models for soils and the BRICK model as an example of the hyperplasticity approach”,
    Géotechnique, Vol. 51, No. 2, March, pp 169-172, ISSN 0016-8505
    Paper as pdf (345k), doi:10.1680/geot.51.2.169.40289, request a copy by email
  57. Porter, M.I. and Houlsby, G.T. (2001)
    "Development of crack size and limit state design methods for edge-abraded glass members",
    The Structural Engineer, Vol. 79, No. 8, April, pp 29-35, ISSN 1466-5123
    Paper as pdf (4194k), request a copy by email
  58. Puzrin, A.M. and Houlsby, G.T. (2001)
    "Fundamentals of kinematic hardening hyperplasticity",
    International Journal of Solids and Structures, Vol. 38, No. 21, May, pp 3771-3794, ISSN 0020-7683
    Paper as pdf (236k), doi:10.1016/S0020-7683(00)00238-9, request a copy by email
  59. Puzrin, A.M. and Houlsby, G.T. (2001)
    "On the non-intersection dilemma in multi-surface plasticity",
    Géotechnique, Vol. 51, No. 4, May, pp 369-372, ISSN 0016-8505
    Paper as pdf (435k), doi:10.1680/geot.51.4.369.39400, request a copy by email
  60. Byrne, B.W. and Houlsby, G.T. (2001)
    "Observations of footing behaviour on loose carbonate sands",
    Géotechnique, Vol. 51, No. 5, June, pp 463-466, ISSN 0016-8505
    Paper as pdf (436k), doi:10.1680/geot.51.5.463.39971, request a copy by email
  61. Puzrin, A.M. and Houlsby, G.T. (2001)
    "A thermomechanical framework for rate-independent dissipative materials with internal functions",
    International Journal of Plasticity, Vol. 17, pp 1147-1165, ISSN 0749-6419
    Paper as pdf (165k), doi:10.1016/S0749-6419(00)00083-8, request a copy by email
  62. Cassidy, M.J., Eatock Taylor R. and Houlsby, G.T. (2001)
    "Analysis of jack-up units using a constrained NewWave methodology",
    Applied Ocean Research, Vol. 23, pp 221-234, ISSN 0141-1187 
    Paper as pdf (444k), doi:10.1016/S0141-1187(01)00005-0, request a copy by email
  63. Martin, C.M. and Houlsby, G.T. (2001)
    “Combined loading of spudcan foundations on clay: numerical modelling”,
    Géotechnique, Vol. 51, No. 8, October, pp 687-700, ISSN 0016-8505
    Paper as pdf (1257k), doi:10.1680/geot.51.8.687.40470, request a copy by email
  64. Koumoto, T. and Houlsby, G.T. (2001)
    “Theory and practice of the fall cone test”,
    Géotechnique, Vol. 51, No. 8, October, pp 701-712, ISSN 0016-8505
    Paper as pdf (780k), doi:10.1680/geot.51.8.701.40475, request a copy by email
  65. Houlsby, G.T. and Puzrin, A.M. (2002)
    “Rate-dependent plasticity models derived from potential functions”,
    Journal of Rheology, Vol. 46, No. 1, January/February, pp 113-126, ISSN 0148-6055
    Paper as pdf (104k), doi:10.1122/1.1427911, request a copy by email
  66. Houlsby, G.T. and Cassidy, M.J. (2002)
    "A plasticity model for the behaviour of footings on sand under combined loading",
    Géotechnique, Vol. 52, No. 2, March, pp 117-129, ISSN 0016-8505
    (Received the David Hislop Award, Institution of Civil Engineers, 2003)
    Paper as pdf (1290k), doi:10.1680/geot.52.2.117.40922, request a copy by email
  67. Cassidy, M.J., Taylor, P.H., Eatock Taylor, R. and Houlsby, G.T. (2002)
    “Evaluation of long-term extreme response statistics of jack-up platforms”,
    Ocean Engineering, Vol. 29, October, pp 1603-1631, ISSN 0029-8018
    Paper as pdf (665k), doi:10.1016/S0029-8018(01)00110-X, request a copy by email
  68. Byrne, B.W. and Houlsby, G.T. (2002)
    “Experimental investigations of the response of suction caissons to transient vertical loading”,
    Proc. ASCE, Journal of Geotechnical Engineering, Vol. 128, No. 11, Nov., pp 926-939, ISSN 1090-0241;
    Paper as pdf (676k), doi:10.1061/(ASCE)1090-0241(2002)128:11(926), request a copy by email
  69. Cassidy, M.J. and Houlsby, G.T. (2002)
    “Vertical bearing capacity factors for conical footings on sand”,
    Géotechnique, Vol. 52, No. 9, November, pp 687-692, ISSN 0016-8505
    Paper as pdf (424k), doi:10.1680/geot.52.9.687.38836, request a copy by email
  70. Cassidy, M.J., Byrne, B.W. and Houlsby, G.T. (2002)
    “Modelling the behaviour of circular footing under combined loading on loose carbonate sand”,
    Géotechnique, Vol. 52, No. 10, pp 705-712, ISSN 0016-8505
    Paper as pdf (461k), doi:10.1680/geot.52.10.705.38846, request a copy by email
  71. Byrne, B.W., Houlsby, G.T., Martin, C.M. and Fish, P. (2002)
    "Suction caisson foundations for offshore wind turbines",
    Wind Engineering, Vol. 26, No. 3, pp 145-155, ISSN 0309-524X
    Paper as pdf (4411k), request a copy by email
  72. Puzrin, A.M. and Houlsby, G.T. (2003)
    “Rate dependent hyperplasticity with internal functions”,
    Proceedings of the American Society of Civil Engineers, Journal of the Engineering Mechanics Division, Vol. 129, No. 3, March, pp 252-263, ISSN 0733-9399
    Paper as pdf (224k), doi:10.1061/(ASCE)0733-9399(2003)129:3(252), request a copy by email
  73. Houlsby, G.T and Martin, C.M. (2003)
    "Undrained bearing capacity factors for conical footings on clay",
    Géotechnique, Vol. 53, No. 5, June, pp 513-520, ISSN 0016-8505
    Paper as pdf (184k), doi:10.1680/geot.53.5.513.37507, request a copy by email
  74. Einav, I., Puzrin, A.M. and Houlsby, G.T. (2003)
    "Numerical studies of hyperplasticity with single, multiple and a continuous field of yield surfaces",
    International Journal for Numerical and Analytical Methods in Geomechanics, Vol 27, No. 10, pp 837-858, ISSN 0363-9061
    Paper as pdf (357kB), doi:10.1002/nag.303, request a copy by email
  75. Einav, I., Puzrin, A.M and Houlsby, G.T. (2003)
    “Continuous hyperplastic models for overconsolidated clays”,
    Mathematical and Computer Modelling, (special issue on Mathematical Models in Geomechanics, proceedings of symposium at Scilla di Reggio Calabria, 19-22 Sept. 2000), Vol. 37, No. 5/6, pp 515-523, ISSN 0895-7177
    Paper as pdf (725kB), doi:10.1016/S0895-7177(03)00044-X, request a copy by email, poster as pdf (85kB)
  76. Houlsby, G.T. (2003)
    Discussion on: ‘Al-Shayea, N., Abduljauwad, S., Bashir, R., Al-Ghamedy, H. and Asi, I. (2003) “Determination of parameters for hyperbolic model of soils”, Proceedings of the Institution of Civil Engineers, Geotechnical Engineering, Vol. 156, pp 105-117’,
    Proceedings of the Institution of Civil Engineers, Geotechnical Engineering, Vol. 156, p 225, ISSN 1353-2618
    Paper as pdf (45k), doi:10.1680/geng.156.4.225.37534, request a copy by email
  77. Cassidy, M.J., Houlsby, G.T. and Eatock Taylor, R. (2003)
    "Probabilistic models applicable for the short term extreme response analysis of jack-up platforms",
    Journal of Offshore Mechanics and Arctic Engineering, Trans. ASME, Vol. 125, No. 4, November, pp 249-263, ISSN 0892-7219
    Paper as pdf (669k), doi:10.1115/1.1600470, request a copy by email
  78. Byrne, B.W. and Houlsby, G.T. (2003)
    "Foundations for offshore wind turbines",
    Philosophical Transactions of the Royal Society of London, Series A, Vol. 361, December, pp 2909-2930, ISSN 1364-503X
    Paper as pdf (1565k), doi:10.1098/rsta.2003.1286, request a copy by email
  79. Byrne, B.W. and Houlsby, G.T. (2004)
    “Experimental investigations of the response of suction caissons to transient combined loading”,
    Proc. ASCE, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 130, No. 3, pp 240-253, ISSN 1090-0241
    Paper as pdf (1135k), doi:10.1061/(ASCE)1090-0241(2004)130:3(240), request a copy by email
  80. Cassidy, M.J., Martin, C.M. and Houlsby, G.T. (2004)
    "Development and application of force resultant models describing jack-up foundation behaviour",
    Marine Structures, (special issue on Jack-up Platforms: Papers from 9th Int. Conf. on Jack-Up Platform Design, Construction and Operation, September 23-24, City University, London), Vol. 17, No. 3-4, May-August, pp 165-193, ISSN 0951-8339
    Paper as pdf (1077kB), doi:10.1016/j.marstruc.2004.08.002, request a copy by email
  81. Houlsby, G.T. and Byrne, B.W. (2005)
    “Design procedures for installation of suction caissons in clay and other materials”,
    Proceedings of the Institution of Civil Engineers, Geotechnical Engineering, Vol. 158, No. GE2, April, pp 75-82, ISSN 1353-2618
    Paper as pdf (235kB), doi:10.1680/geng.158.2.75.61630, request a copy by email
  82. Houlsby, G.T., Kelly, R.B., Huxtable, J. and Byrne, B.W. (2005)
    “Field trials of suction caissons in clay for offshore wind turbine foundations”,
    Géotechnique, Vol. 55, No. 4, May, pp 287-296, ISSN 0016-8505
    Paper as pdf (586k), doi:10.1680/geot.55.4.287.65487, request a copy by email
    (Awarded a Halcrow Prize, Institution of Civil Engineers, 2006)
  83. Houlsby, G.T., Amorosi, A. and Rojas, E. (2005)
    “Elastic moduli of soils dependent on pressure: a hyperelastic formulation”,
    Géotechnique, Vol. 55, No. 5, June, pp 383-392, ISSN 0016-8505
    Paper as pdf (224k), doi:10.1680/geot.55.5.383.66021, request a copy by email
  84. Houlsby, G.T. and Byrne, B.W. (2005)
    “Design procedures for installation of suction caissons in sand”,
    Proceedings of the Institution of Civil Engineers, Geotechnical Engineering, Vol. 158, No. GE3, July, pp 135-144, ISSN 1353-2618
    Paper as pdf (233kB), doi:10.1680/geng.158.3.135.66297, request a copy by email
  85. Houlsby, G.T, Cassidy, M.J. and Einav, I. (2005)
    "A generalised Winkler model for the behaviour of shallow foundations",
    Géotechnique, Vol. 55, No. 6, June, pp 449-460, ISSN 0016-8505
    Paper as pdf (457k), doi:10.1680/geot.2005.55.6.449, request a copy by email
  86. Augarde, C.E., Burd, H.J. and Houlsby, G.T. (2005)
    Discussion on: ‘Franzius, J.N., Potts, D.M, Addenbrooke, T.I. and Burland, J.B. (2004) “The influence of building weight on tunnelling-induced ground and building deformation”, Soils and Foundations, Vol. 44, No. 1, pp 25-38’,
    Soils and Foundations, Vol. 45, No. 4, pp 166-167, ISSN 0038-0806
    Paper as pdf (271k), request a copy by email
  87. Korsunsky, A.M., Nguyen, G.D. and Houlsby, G.T. (2005)
    "Analysis of essential work of rupture using non-local damage-plasticity modelling",
    International Journal of Fracture, Vol. 135, Nos. 1-4, Sept., pp L19-L26, ISSN 0376-9429 (Paper), 1573-2673 (Online)
    Paper as pdf (1115kB), doi:10.1007/s10704-005-4391-z, request a copy by email
  88. Doherty, J.P., Houlsby, G.T. and Deeks, A.J. (2005)
    "Stiffness of flexible caisson foundations embedded in non-homogeneous elastic soil",
    Proc. ASCE, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 131, No. 12, Dec., pp 1498-1508
    Paper as pdf (349kB), doi:10.1061/(ASCE)1090-0241(2005)131:12(1498), request a copy by email
  89. Houlsby, G.T., Kelly, R.B., Huxtable, J. and Byrne, B.W. (2006)
    “Field trials of suction caissons in sand for offshore wind turbine foundations”,
    Géotechnique, Vol. 56, No. 1, Jan., pp 3-10, ISSN 0016-8505
    Paper as pdf (461k), doi:10.1680/geot.2006.56.1.3, request a copy by email
  90. Likitlersuang, S. and Houlsby, G.T. (2006)
    "Development of hyperplasticity models for soil mechanics",
    International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 30, No. 3, pp 229-254, ISSN 1096-9853
    Paper as pdf (409k), doi:10.1002/nag.484, request a copy by email
  91. Simoni, A. and Houlsby, G.T. (2006)
    “The direct shear strength and dilatancy of sand-gravel mixtures”,
    Geotechnical and Geological Engineering, Vol. 24, No. 3, pp 523-549, ISSN 0960-3182 (paper) 1573-1529 (online)
    Paper as pdf (833k), doi:10.1007/s10706-004-5832-6, request a copy by email
  92. Bienen, B., Byrne, B.W., Houlsby, G.T., and Cassidy, M.J. (2006)
    “Investigating six-degree-of-freedom loading of shallow foundations on sand”,
    Géotechnique, Vol. 56, No. 6, July, pp 367-379, ISSN 0016-8505
    1. Reply to discussion by D.V. Morris: Géotechnique, Vol. 57, No. 5, pp 483-484
    Paper as pdf (872k), doi:10.1680/geot.2006.56.6.367, request a copy by email
  93. Houlsby, G.T. (2006)
    Discussion on: 'Benmebarek, N., Benmebarek, S., Kastner, R. and Soubra, A.-H. (2006) “Passive and active earth pressures in the presence of groundwater flow”, Géotechnique, Vol. 56, No. 3, pp 149-158'
    Géotechnique, Vol. 56, No. 7, September, pp 521-522, ISSN 0016-8505
    Paper as pdf (45k), doi:10.1680/geot.2006.56.7.521, request a copy by email
  94. Kelly, R.B., Houlsby, G.T. and Byrne, B.W. (2006)
    "A comparison of field and laboratory tests of caisson foundations in sand and clay",
    Géotechnique, Vol. 56, No. 9, November, pp 617-626, ISSN 0016-8505
    Paper as pdf (1018k), doi:10.1680/geot.2006.56.9.617, request a copy by email
  95. Kelly, R.B., Houlsby, G.T. and Byrne, B.W. (2006)
    "Transient vertical loading of model suction caissons in a pressure chamber",
    Géotechnique, Vol. 56, No. 10, December, pp 665-675, ISSN 0016-8505
    Paper as pdf (713k), doi:10.1680/geot.2006.56.10.665, request a copy by email
  96. Einav, I., Houlsby, G.T. and Nguyen, G.D. (2007)
    "Coupled damage and plasticity models derived from energy and dissipation potentials",
    International Journal for Solids and Structures, Vol. 44, Issues 7-8, April, pp 2487-2508
    Paper as pdf (433k), doi:10.1016/j.ijsolstr.2006.07.019, request a copy by email
  97. Nguyen, G.D. and Houlsby, G.T. (2007)
    "Nonlocal damage modelling of concrete: a procedure for the determination of model parameters",
    International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 31, No. 7, June, pp 867-891, ISSN 1096-9853
    Paper as pdf (378k), doi:10.1002/nag.563, request a copy by email
  98. Likitlersuang, S. and Houlsby, G.T. (2007)
    "Predictions of a continuous hyperplasticity model for Bangkok Clay",
    Geomechanics and Geoengineering, Vol. 2, No. 3, September, pp 147-157, ISSN 1748-6025 (paper) 1748-6033 (online)
    Paper as pdf (584k), doi:10.1080/17486020701561479, request a copy by email
  99. Nguyen, G.D. and Houlsby, G.T. (2008)
    "A coupled damage-plasticity model for concrete based on thermodynamic principles: Part I: Model formulation and parameter identification",
    International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 32, No. 4, March, pp 353-389, ISSN 1096-9853
    Paper as pdf (405k), doi:10.1002/nag.627, request a copy by email
  100. Nguyen, G.D. and Houlsby, G.T. (2008)
    "A coupled damage-plasticity model for concrete based on thermodynamic principles: Part II: Non-local regularization and numerical implementation",
    International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 32, No. 4, March, pp 391-413, ISSN 1096-9853
    Paper as pdf (501k), doi:10.1002/nag.649, request a copy by email
  101. Salgado, R., Houlsby, G.T. and Cathie, D.N. (2008)
    "Contributions to Géotechnique 1948-2007: Foundation engineering",
    Géotechnique, Vol. 58, No. 5, June, pp 369-375, ISSN 0016-8505
    Paper as pdf (118k), doi:10.1680/geot.2008.58.5.369, request a copy by email

    Papers currently in press

    Papers submitted for publication

  102. Bakmar, C.L., Houlsby, G.T. and Byrne, B.W. (2007)
    "Response of Stiff Piles to Long-term Cyclic Loading",
    submitted to Géotechnique
  103. Villalobos, F., Byrne, B.W. and Houlsby, G.T. (2007)
    "Drained Capacity of Caisson Foundations under Monotonic Loading for Offshore Applications",
    submitted to Soils and Foundations
  104. Houlsby, G.T. (2008)
    "Potential particles: a method for modelling non-circular particles in DEM",
    submitted to Computers and Geotechnics

    105. Papers under revision

  105. Bloodworth, A.G. and Houlsby, G.T. (2005)
    "Modelling tunnelling interaction with buildings at Ramsgate Harbour",
    submitted to Proc. ICE, Geotechnical Engineering, under revision
  106. Likitlersuang, S. and Houlsby, G.T. (2006)
    "A model for shear response of asphaltic concrete at different shear rates and temperatures",
    submitted to Proceedings of the American Society of Civil Engineers, Journal of the Engineering Mechanics Division, under revision